News

Where should antifreeze be poured in a hot tub?

2024-11-01 15:35

With the arrival of winter, the antifreeze of outdoor hot tubs has become a focus of users. The use of antifreeze is one of the key measures to effectively prevent the freezing of hot tub pipes and equipment.


However, how to use antifreeze correctly and where to pour antifreeze often troubles many hot bathtub users. This article will discuss in detail the correct use of antifreeze to help users protect their hot bathtubs in cold seasons.

hot tub

What is the role of hot water tub antifreeze?

Hot tub antifreeze mainly prevents water from freezing at low temperatures by lowering the freezing point of water. For hot tubs, antifreeze can effectively protect important components such as pipes, pumps and heaters from the effects of cold weather, avoiding equipment damage and pipe rupture.


What types of hot tub antifreeze are there?

Common hot bathtub antifreeze on the market is mainly divided into: ethylene glycol antifreeze (toxic), propylene glycol antifreeze (food grade ingredients, non-toxic, safe to use), special antifreeze (non-toxic).


    ● Ethylene glycol antifreeze: Commonly used in car cooling systems, it has a good antifreeze effect, but it should be noted that ethylene glycol is toxic and it must be ensured that the antifreeze does not contaminate the water source.

    ● Propylene glycol antifreeze: Compared with ethylene glycol, propylene glycol antifreeze is safer and suitable for home hot bathtubs. Propylene glycol is a food-grade ingredient, non-toxic and safe to use.

    ● Special antifreeze: Some manufacturers produce special hot bathtub antifreeze, which is usually a non-toxic formula designed for hot tub systems, making it more convenient and safe to use.

hot bathtub

How to use hot tub antifreeze correctly?

How to use antifreeze:

1. Preparation

2. Where to pour the antifreeze

3. Circulate antifreeze


1. Preparation

Before using antifreeze, you need to do the following preparations:


    ● Turn off the power: First turn off the power of the hot bathtub to ensure safe operation.

    ● Drain: Completely drain the water from the hot tub through the drain. If the hot tub does not have a built-in drain, a submersible pump can be used to speed up the drainage process.

    ● Cleaning: Clean the inside of the hot tub, especially the nozzles and filters, to ensure that there is no residual water and impurities.


2. Where to pour the antifreeze

The correct use of antifreeze is key, and here are the main pouring locations and steps:


    ● Nozzles and pipes: First, pour antifreeze into the nozzles and pipe system. These parts are most likely to freeze, so you need to ensure that the antifreeze can be fully covered. You can use a funnel to pour the antifreeze into the nozzle mouth and start the nozzle for a few seconds to ensure that the antifreeze enters the pipe.

    ● Filter: Remove the filter and pour the antifreeze into the filter housing. Reinstall the filter and ensure that the antifreeze circulates through the pipes.

    ● Pump and heater: Open the drain of the pump and heater and pour the antifreeze into these parts to ensure that there is no residual water inside. Close the drain to ensure that the antifreeze stays inside.

    ● Sink and water inlet: Finally, pour the antifreeze into the sink and water inlet of the hot bathtub to ensure that all pipes and parts are protected from freezing.


3. Circulating antifreeze

To ensure that the antifreeze can be fully circulated to all parts of the hot tub, you can start the circulation system briefly. Let the antifreeze flow through the pipes and equipment for a few minutes, then turn off the system to ensure that the antifreeze is evenly distributed.


What are the precautions after using antifreeze?

1. Regular inspection: Throughout the winter, check the status of the hot water tub regularly, especially after extremely cold weather. Make sure that the antifreeze has not been lost and the pipes and equipment are not frozen or cracked.

2. Replacement of antifreeze: If the antifreeze color becomes turbid or the effect is weakened, it should be replaced with new antifreeze in time. The old antifreeze may lose its antifreeze effect and cannot effectively protect the equipment.


3. Safe storage: Antifreeze should be stored in places where children and pets cannot reach, especially ethylene glycol antifreeze is toxic and must be properly kept.

4. Environmentally friendly disposal: Waste antifreeze cannot be discharged at will and should be disposed of in accordance with local environmental regulations. Many places have special waste liquid recycling points where old antifreeze can be safely disposed of.

hot water tub

Common questions about hot bathtub antifreeze

Will using hot tub antifreeze affect water quality?

Special hot water tub antifreeze is usually non-toxic and has little effect on water quality. However, before reusing the hot water tub, it is recommended to thoroughly clean the pipes and equipment to ensure that there is no residual antifreeze.


Can hot tub antifreeze be reused?

Antifreeze will gradually lose its effectiveness during use. It is recommended to replace it once a year to ensure the antifreeze effect. Do not reuse old antifreeze to avoid affecting the antifreeze effect.


What should I do if the hot bathtub antifreeze is insufficient?

Make sure to purchase enough antifreeze. Different models and sizes of hot tubs require different amounts of antifreeze. You can consult the manufacturer or refer to the instructions for use before purchasing. If you find that the antifreeze is insufficient, you should replenish it in time to prevent the pipes and equipment from freezing.

Get the latest price? We'll respond as soon as possible(within 12 hours)
This field is required
This field is required
Required and valid email address
This field is required
This field is required
For a better browsing experience, we recommend that you use Chrome, Firefox, Safari and Edge browsers.