
News
The amount of bromine tablets used should be adjusted according to the capacity of the outdoor jacuzzi bathtub and the requirements of water quality. Generally speaking, the recommended amount of bromine tablets is 1-2 tablets per 1,000 liters of water. However, the specific amount may vary depending on the brand, bromine tablet concentration, and actual use of the bathtub.
"HFL" is the abbreviation of "High Flow", which means high flow. In the control system of outdoor spa hot tubs, the "HFL" code is usually used to inform users that the current water flow status is abnormal, usually because the water pump detects a high water flow rate when it is turned on, or the flow sensor determines that the water flow is abnormal.
As for whether the outdoor whirlpool hot tub can be opened and used normally without water, the answer is: No. The reason is that many core components of the whirlpool hot tub rely on the flow of water to work properly, and the lack of water will cause a series of problems.
● Soaking bathtub: The water quality maintenance is relatively simple. Users only need to change the water regularly and keep the bathtub clean. ● Whirlpool hot tub: The water quality management of whirlpool hot tub is relatively complex, especially the maintenance of water flow system and air flow system.
There are many methods available on the market to disinfect the water quality of whirlpool spa hot tubs. Here are some common water disinfection methods: 1. Chlorine disinfection 2. Bromine disinfection 3. Ultraviolet disinfection 4. Chlorine dioxide disinfection 5. Salt water electrolysis disinfection
For soreness after intense exercise (such as running or weightlifting), the outdoor spa hot tub water temperature should be maintained between 38°C and 40°C. Higher temperatures can help clear lactic acid faster and reduce soreness.
In theory, a 200-gallon outdoor whirlpool bathtub requires a flow rate of approximately 5 to 7 gallons per minute (GPM) to achieve an ideal massage effect, and the water flow pressure should be maintained between 30 and 50 pounds per square inch (psi) to ensure the impact force of the water flow.
The moisture barrier outside the foam core is the first line of defense for the spa hot tub cover, and it is responsible for preventing water vapor and moisture from entering the foam. Once the moisture barrier is damaged, moisture vapor, rain or ambient humidity from the outdoor spa hot tub can penetrate the foam core, causing the foam to gradually absorb water, causing the cover to become heavier and heavier.
Legionella prefers to grow in water between 20°C and 45°C. If your whirlpool hot tub is kept in this temperature range for a long time, especially between 25°C and 42°C, the risk of Legionella proliferation will increase.
The pH value of water is one of the key indicators affecting water quality. The ideal pH value range should be between 7.2 and 7.8. Too high or too low pH values may cause water quality problems and even damage the components of the whirlpool spa hot tub, especially pipes and nozzles.