News

There are many methods available on the market to disinfect the water quality of whirlpool spa hot tubs. Here are some common water disinfection methods: 1. Chlorine disinfection 2. Bromine disinfection 3. Ultraviolet disinfection 4. Chlorine dioxide disinfection 5. Salt water electrolysis disinfection

For soreness after intense exercise (such as running or weightlifting), the outdoor spa hot tub water temperature should be maintained between 38°C and 40°C. Higher temperatures can help clear lactic acid faster and reduce soreness.

The moisture barrier outside the foam core is the first line of defense for the spa hot tub cover, and it is responsible for preventing water vapor and moisture from entering the foam. Once the moisture barrier is damaged, moisture vapor, rain or ambient humidity from the outdoor spa hot tub can penetrate the foam core, causing the foam to gradually absorb water, causing the cover to become heavier and heavier.

Legionella prefers to grow in water between 20°C and 45°C. If your whirlpool hot tub is kept in this temperature range for a long time, especially between 25°C and 42°C, the risk of Legionella proliferation will increase.

The pH value of water is one of the key indicators affecting water quality. The ideal pH value range should be between 7.2 and 7.8. Too high or too low pH values ​​may cause water quality problems and even damage the components of the whirlpool spa hot tub, especially pipes and nozzles.

If space is limited, users may need to weigh whether it is necessary to build a gazebo above the outdoor garden hot tub, or whether there are other alternatives, such as simple awnings.

For patients with urinary tract infections, soaking in a hot tub for a long time may affect the normal function of the urinary system, leading to increased water loss and urine concentration, which may further irritate the bladder, thereby aggravating the symptoms of urinary tract infections, such as urinary pain and urgency.

Some high-end outdoor whirlpool hot tubs are equipped with a low temperature heating function to slowly heat the water in the tub. If this function is not available, you can use a heater or heat gun to gradually heat the water and control the rate of temperature increase.

The heater is one of the most critical components in winter maintenance. Check the working status of the heater every once in a while to ensure that it can maintain the water temperature normally. If the outdoor whirlpool hot tub heater is found to be unstable, it should be replaced or repaired in time.

Large outdoor hot tubs are usually more than 2 meters long, about 2 meters wide and more than 0.9 meters high. This size is enough to accommodate more water and provide a comfortable space for multiple users. In contrast, small and medium-sized bathtubs are generally between 1.5 meters and 2 meters long.

Clean the nozzle and pipes Keeping the nozzle and pipes clean is the basis for ensuring strong water flow. Over time, scale, bacteria and other contaminants may accumulate inside the nozzle and pipes. These impurities will hinder the water flow and weaken the water flow of the outdoor whirlpool hot tub nozzle.

Without chlorine or other disinfectants, the number of bacteria and viruses in the water may increase rapidly. The growth of bacteria and viruses not only causes dirty water, but also poses health risks, especially when multiple people share an outdoor whirlpool hot tub, the risk of cross-infection increases significantly.