News

In this article, we will take a deep look at how to create a perfect hot tub privacy space at home through a variety of ways such as landscape design, privacy fences, pavilions, accessories, etc.

Hot tubs can burn a small amount of calories, but if you want to lose weight you still need to exercise moderately and eat a healthy diet.

Since the hot tub heater is directly involved in the heating and circulation of water, it inevitably involves the water in the bathtub when replacing the heater. The replacement operation of the hot bathtub heater requires disconnecting the water pump and the pipe system, which usually means that the water needs to be drained to prevent water from overflowing or leaking during the operation.

The low temperature environment in winter poses many challenges to the operation of outdoor hot tubs, the most obvious of which is the rapid loss of water temperature and the potential risk of equipment damage. Therefore, covering the hot tub has become a key measure to protect the equipment and save energy.

After adjusting the outdoor hot tub alkalinity, users need to give the water quality a certain amount of time to stabilize. Generally, you should wait at least 4 to 6 hours after adjusting the hot tub alkalinity before adjusting the pH. This is because when adding chemicals to adjust the alkalinity, the chemical reaction in the water takes a certain amount of time to complete.

The growth of algae is often accompanied by changes in the chemical composition of the hot tub water, such as increased hot bathtub pH and turbidity. Contact with water containing algae may cause discomfort to the eyes and respiratory tract, especially when other harmful microorganisms are present in the water.

The maintenance of the ozone generator is relatively simple. Once installed, it is usually only necessary to regularly check the operation of the ozone generator and perform necessary cleaning and maintenance. Because ozone can reduce the use of other chemicals, ozone systems perform well in reducing chemical residues and maintaining water quality.

When shocking, especially when using non-chlorine shocking agents (such as potassium persulfate), the shocking agent converts bromineamines back to hypobromous acid through oxidation. This process does not increase the actual bromine content in the water, but it does increase the concentration of active bromine.