News

If the outdoor whirlpool hot tub water temperature is high and the air temperature is also high, the chlorine may evaporate in just a few hours to a day. For example, over the course of a day's use, the water surface exposed to the air will accelerate the evaporation of chlorine, especially if the hot tub is not covered after use.

In general, it is necessary to test the outdoor whirlpool hot tub water quality at least once a week. This applies to most whirlpool hot tubs for home and private use. Testing once a week can help detect water quality problems such as high or low pH, insufficient chlorine content, etc. in time.

Although there is a possibility of virus transmission, it does not mean that it will definitely spread in large quantities in the water. In fact, the risk of herpes transmission in an outdoor whirlpool hot tub is not high. The key is whether there is an opportunity for direct contact with an infected person.

If the outdoor whirlpool hot tub water itself contains a large amount of minerals, especially alkaline substances such as calcium carbonate, the use of ozone may accelerate the precipitation reaction of these minerals, resulting in an increase in pH.

Once the power goes out, the first thing to do is to ensure that all electrical equipment in the outdoor whirlpool bathtub is turned off to avoid current surges or system damage after the power is restored.

If you choose to place a whirlpool bathtub on concrete paving tiles, the first consideration is to ensure a stable foundation. In order to improve the bearing capacity and stability of the ground, it is usually necessary to add a solid foundation to the bricks.

Power supply problem is one of the common reasons why outdoor whirlpool tubs cannot start. If the power supply to the whirlpool tub is out of power, the entire device will not work properly. Users first need to check the power outlet, switch and circuit fuse to ensure that the power supply is normal.

The bathtub's filtration system will work for 30 minutes to 1 hour during the impact process to ensure that the water quality meets the hygienic standards. However, the length of the filtration time also depends on the chemical agents used, the type of disinfection system (such as ozone disinfection, ultraviolet disinfection, etc.) and the degree of water pollution.

The air pump will make a certain noise when it is operating normally. Although this sound is not piercing, it should be even and continuous. If you find that the air pump is not very audible, or only intermittently, there may be something wrong with the air system.

Impurities in water are one of the common reasons for inaccurate chlorine test results. The water in the whirlpool bathtub contains not only chlorine, but also a variety of other substances, including organic matter, minerals, dissolved gases, and pollutants from the human body.

The water in outdoor whirlpool hot tubs is usually warm, and the water temperature is generally maintained between 37°C and 40°C, which provides a suitable environment for the reproduction of bacteria. Staphylococcus aureus is a bacterium that easily reproduces in a warm environment. If the water quality of the bathtub is not properly managed, bacteria may grow in the water and be transmitted to the user through contact.

Its working principle involves multiple mechanical and electrical components, which are exposed to the outdoor environment for a long time and are inevitably affected by factors such as weather, temperature changes, and pollutants. Therefore, it does require certain maintenance work to keep it working properly.