News

The 10×10 foot (about 3×3 meters) gazebo is a more common standard size, suitable for small and medium-sized outdoor jacuzzi bathtubs. This size of gazebo can provide enough coverage for a jacuzzi bathtub for 4 to 6 people, while leaving a proper amount of activity space around it, which is suitable for small families.

Hot tub cover insulation is reduced The insulation effect of the outdoor spa hot tub cover is a key function. If you notice that the water temperature in your tub drops rapidly and the heating system is working for a noticeable increase in time, this may be because the cover has lost its insulation.

The amount of bromine tablets used should be adjusted according to the capacity of the outdoor jacuzzi bathtub and the requirements of water quality. Generally speaking, the recommended amount of bromine tablets is 1-2 tablets per 1,000 liters of water. However, the specific amount may vary depending on the brand, bromine tablet concentration, and actual use of the bathtub.

"HFL" is the abbreviation of "High Flow", which means high flow. In the control system of outdoor spa hot tubs, the "HFL" code is usually used to inform users that the current water flow status is abnormal, usually because the water pump detects a high water flow rate when it is turned on, or the flow sensor determines that the water flow is abnormal.

As for whether the outdoor whirlpool hot tub can be opened and used normally without water, the answer is: No. The reason is that many core components of the whirlpool hot tub rely on the flow of water to work properly, and the lack of water will cause a series of problems.

● Soaking bathtub: The water quality maintenance is relatively simple. Users only need to change the water regularly and keep the bathtub clean. ● Whirlpool hot tub: The water quality management of whirlpool hot tub is relatively complex, especially the maintenance of water flow system and air flow system.

There are many methods available on the market to disinfect the water quality of whirlpool spa hot tubs. Here are some common water disinfection methods: 1. Chlorine disinfection 2. Bromine disinfection 3. Ultraviolet disinfection 4. Chlorine dioxide disinfection 5. Salt water electrolysis disinfection

For soreness after intense exercise (such as running or weightlifting), the outdoor spa hot tub water temperature should be maintained between 38°C and 40°C. Higher temperatures can help clear lactic acid faster and reduce soreness.

In theory, a 200-gallon outdoor whirlpool bathtub requires a flow rate of approximately 5 to 7 gallons per minute (GPM) to achieve an ideal massage effect, and the water flow pressure should be maintained between 30 and 50 pounds per square inch (psi) to ensure the impact force of the water flow.

The moisture barrier outside the foam core is the first line of defense for the spa hot tub cover, and it is responsible for preventing water vapor and moisture from entering the foam. Once the moisture barrier is damaged, moisture vapor, rain or ambient humidity from the outdoor spa hot tub can penetrate the foam core, causing the foam to gradually absorb water, causing the cover to become heavier and heavier.