News

Usually, a freestanding whirlpool bathtub can have a water jet function. However, the specific implementation of this function depends on the design and configuration of the bathtub. Not all freestanding bathtubs have a built-in water jet function.

Plug n play hot tub advantages: 1. Easy installation 2. Portability and flexibility 3. Low initial cost 4. Energy saving 5. Simple operation Disadvantages of plug n play hot tubs: 1. Slower heating speed 2. Weak hydromassage effect 3. Limited capacity 4. Limitations on heating and massage 5. Limited applicable environment

Most swim spa tubs are equipped with two or more filters to ensure that the water quality is kept in the best condition. Usually, a swim spa tub filtration system will include the following two main types of filters: ● Main filter ● Auxiliary filter

Two person outdoor hot tubs generally require at least 500 to 1000 kg of support force, because it is not only the weight of the tub itself, but also the weight of the heating system, water and the user. When choosing the installation location, first make sure that the balcony has a strong enough load-bearing capacity.

• A 300-gallon whirlpool hot tub weighs approximately 300 gallons × 8.34 pounds = 2,502 pounds (about 1,134 kilograms) when filled with water • A 600-gallon whirlpool hot tub weighs approximately 600 gallons × 8.34 pounds = 5,004 pounds (about 2,270 kilograms) • A 1,000-gallon whirlpool hot tub weighs approximately 1,000 gallons × 8.34 pounds = 8,340 pounds (about 3,785 kilograms) when filled with water

If the surface of the bath balls is too smooth or the design is unreasonable, they may be sucked into the spa hot tub filter under the push of the water flow, causing the filter to be blocked, thereby affecting the water purification function.

The nozzles of swim spa jacuzzi tubs usually need to be used for a long time and frequently. As the use time increases, the strength of the nozzles in terms of water pressure, air flow, etc. gradually increases, which may cause wear and aging of the internal parts of the nozzles.

The water quality adjustment of the whirlpool massage bathtub is relatively complex, because the particularity of its water flow and temperature system requires that the water quality be kept within a certain balance range. For example, the pH value, chlorine content, hardness and total alkalinity of the water need to be kept within a certain standard range.

Generally speaking, the pump power range for small outdoor hot tubs is between 0.5 and 2 horsepower. The specific choice of pump power needs to be comprehensively considered based on the size of the bathtub, the number of massage nozzles, the intensity of the water flow, etc.

For swim spa jacuzzi, it is recommended to add chlorine or bromine at least once a week when the water temperature is appropriate. Generally, the concentration of chlorine should be maintained at 1 to 3 ppm (parts per million), and the concentration of bromine should be maintained at 3 to 5 ppm.