News

Hot tub stabilizers, as the name suggests, are devices that help maintain the chemical balance in water. Generally, the function of stabilizers is mainly focused on regulating the concentration of chlorine and other disinfectants in water to ensure water quality safety and prevent the growth of harmful microorganisms.

the inner walls and plumbing systems of a whirlpool bathtub are made of specific materials. Although these materials have a certain degree of durability, they may still be corroded to varying degrees when exposed to strong oxidants. The sodium hypochlorite in bleach can react chemically with materials such as plastic and rubber, causing the materials to age, become brittle, or even crack.

The fastest way to cool down a hot tub: 1. Turn off the heater and heating function 2. Refill the tub with cold water 3. Use a cooling device or ice cubes 4. Maintain good water circulation 5. Cover or avoid direct sunlight 6. Use fans or air circulation to speed up cooling

Prolonged exposure to hot water can damage the stratum corneum, the skin's natural barrier. Hot water dissolves the natural oils on the skin's surface, damaging the skin's moisture barrier. This causes water to drain quickly from the skin, leaving it dry, tight, and even cracked. This dryness may be accompanied by itching and tingling, especially in people with sensitive skin.

After taking a jacuzzi, the following substances may remain on the surface of the skin: 1. Disinfectants (such as chlorine or bromine) 2. Dissolved dirt and grease 3. Microscopic pollutants in the environment Taking a shower immediately can effectively remove these residues and reduce their impact on the skin, especially for people with sensitive skin. This step is particularly important.

The water jets of outdoor massage bathtubs can usually focus on specific parts of the body to relieve pressure points in the waist, neck or shoulders. For patients with herniated discs, water massage can effectively act on the painful area and help relieve local pain caused by nerve compression.

If the outside temperature drops below -10°C and the unit is not in operation for a long time or the power is lost, the water in the hot tub pipes will face a high risk of freezing.

When the jets are turned on, there should be a strong and continuous flow. The force of the water jets should be evenly distributed, and the flow strength of each jet should be similar, without obvious weakening or intermittent flow.

Generally speaking, the ideal soaking time in a whirlpool massage bathtub is 15 to 30 minutes. This duration ensures that users can fully enjoy the relaxation and health benefits of water massage while avoiding physical discomfort caused by soaking for too long.

Minimum budget: about $80 to $120, suitable for small bathtubs and users who use it less frequently. Medium budget: about $150 to $250, suitable for users with medium-sized bathtubs and heavy use in winter. High budget: Over $300, for those with large baths, many features, or those who require professional maintenance.

Benefits of soaking in an outdoor hot tub in winter: 1. Promote blood circulation 2. Soothe muscles and joints 3. Enhance immune function 4. Improve mental health 5. Improve sleep quality Potential risks of soaking in an outdoor hot tub on a snowy day: 1. Risks caused by body temperature fluctuations 2. Risk of dehydration 3. Equipment maintenance and frost damage 4. Risk of accidental slips 5. Risk of body exposure to cold air

If you plan to not use the tub in the winter, it is recommended to drain the water completely to prevent the water from freezing in the cold environment. After draining the water, wipe the inside and outside surfaces of the tub with a mild detergent to remove dirt and mineral deposits.