News

A hot tub cooler, also known as a water temperature regulator or hot tub water temperature cooling system, is a device specifically designed to reduce the temperature of the water in a hot tub. Unlike most hot tubs that maintain the water temperature through heating elements, coolers can reduce the water temperature so that users can still enjoy a comfortable spa experience in hot weather.

Generally speaking, the water temperature should be kept between 37-40°C (about 98-104°F), which is a range suitable for sterilization. Although it may not be a very high temperature, it helps to inhibit the growth of common bacteria and algae, thereby keeping the water clean.

For private hot tubs, which are common in home yards, Florida law is relatively relaxed. Private tubs are generally classified as part of a residential building, so in most cases, no special permit is required for installation and use. However, some specific situations may require special approvals:

Molded seats are usually designed according to the curves of the human body, providing good support and a comfortable sitting position, reducing fatigue during long soaking. Fixed seats provide a stable sitting position, especially suitable for the elderly or people with limited mobility, ensuring that they are safer during use.

Electric heaters are one of the most common types of hot tub heaters. They heat the water through a resistance element, are simple to install, and are widely used. Electric heaters usually cost between $500 and $1,500, depending on the power, brand, and heating efficiency. High-powered electric heaters heat water faster, but they also mean higher electricity costs.

For example, if a 2-horsepower pump (about 1,500 watts) runs for 1 hour, it consumes 1.5 kWh. If you use the massage jets for 1 hour per day, such a pump will consume about 45 kWh per month. The specific power consumption depends on the power of the pump and how long you use the massage function.

Studies have shown that contact with natural environments has a positive effect on mental health. Outdoor spa bathtubs are usually located in places with pleasant scenery. With the help of the audio-visual stimulation of natural landscapes, people can enter a meditative state and thus gain psychological relaxation.

The water flow of the spa bathtub needs to be kept clean to ensure the comfort and health of the user. If impurities, dirt and microorganisms in the water are not cleaned in time, the water quality may deteriorate, affecting the user experience and even causing health problems.

Advantages of long-term opening ● Maintaining massage effect: Turning on the relaxation nozzle for a long time can maintain continuous water flow massage, help relieve muscle tension, and bring a deeper relaxation effect. ● Good water circulation effect: The long-term opening of the nozzle helps the water body circulate, which can prevent the water quality from becoming turbid, and at the same time allow the disinfectant to be fully distributed in the water.

Whirlpool bathtubs are not much different from ordinary bathtubs in appearance, but their interior is much more complicated. It is equipped with multiple jets, water pumps and air mixing systems, which are usually installed on the inner wall or bottom of the bathtub.

When the pH level in a hot tub is too low, the water becomes acidic, which can have significant effects on the skin. Acidic water weakens the natural barrier on the surface of the skin, making the skin more vulnerable to chemicals and bacteria, which can cause problems such as rashes.

Hot tubs are typically set at a maximum temperature of 104 degrees Fahrenheit, which is the upper safety limit set by the U.S. Consumer Product Safety Commission (CPSC) and many hot tub manufacturers.