News

Avoid overload and power damage General sockets in the home can generally only provide a maximum current of 10A (usually 220V voltage under Chinese standards), while the power requirements of most outdoor spa hot tubs far exceed this standard.

The steps and sequence of disassembling an outdoor spa hot tub are very important. Planning the disassembly sequence in advance can help avoid unnecessary disassembly steps and damage. Generally, the basic steps of the disassembly process include draining, removing electrical connections, removing water pipe connections, and removing the tub structure.

The heater is a vital component in the whirlpool spa hot tub. If the heater itself fails or is damaged, the water temperature cannot be raised to the set value. Common heater failures include: ● Burned heating element ● Heater scale accumulation ● Heater circuit problem

After long-term use, whirlpool spa hot tubs are prone to accumulate scale and soap scum, causing the inner wall of the bathtub to become slippery and even discolored. Baking soda is a mild scrub that can easily wipe away scale without damaging the bathtub material.

Plug n play hot tub advantages: 1. Easy installation 2. Portability and flexibility 3. Low initial cost 4. Energy saving 5. Simple operation Disadvantages of plug n play hot tubs: 1. Slower heating speed 2. Weak hydromassage effect 3. Limited capacity 4. Limitations on heating and massage 5. Limited applicable environment

Two person outdoor hot tubs generally require at least 500 to 1000 kg of support force, because it is not only the weight of the tub itself, but also the weight of the heating system, water and the user. When choosing the installation location, first make sure that the balcony has a strong enough load-bearing capacity.

• A 300-gallon whirlpool hot tub weighs approximately 300 gallons × 8.34 pounds = 2,502 pounds (about 1,134 kilograms) when filled with water • A 600-gallon whirlpool hot tub weighs approximately 600 gallons × 8.34 pounds = 5,004 pounds (about 2,270 kilograms) • A 1,000-gallon whirlpool hot tub weighs approximately 1,000 gallons × 8.34 pounds = 8,340 pounds (about 3,785 kilograms) when filled with water

If the surface of the bath balls is too smooth or the design is unreasonable, they may be sucked into the spa hot tub filter under the push of the water flow, causing the filter to be blocked, thereby affecting the water purification function.

Generally speaking, the pump power range for small outdoor hot tubs is between 0.5 and 2 horsepower. The specific choice of pump power needs to be comprehensively considered based on the size of the bathtub, the number of massage nozzles, the intensity of the water flow, etc.

In many whirlpool hot tubs and spa equipment, "PR" generally refers to "Priming Mode", which is "drainage mode" or "starting mode". This is a special mode that the whirlpool hot tub automatically enters after the initial power-on or restart.

As a relatively fast-acting disinfectant, chlorine needs to be added frequently when used, while bromine has a relatively low maintenance frequency. Especially in terms of maintenance frequency and the application of automated equipment, bromine can provide outdoor spa hot tub users with an easier management experience.

The so-called jelly-like substance in the massage hot tub filter is usually called "biofilm". This sticky substance is a microbial aggregate, a gel-like structure formed by bacteria, fungi, algae and other microorganisms.